Bubble Wrap

Buy Wholesale and Bulk Bubble Wrap In Australia

Wholesale Bubble Wrap Rolls for Australian Businesses

Premium Packaging supplies wholesale bubble wrap rolls to warehouses, eCommerce dispatch teams, removalists, manufacturers and logistics operators across Australia. Select a grade by product weight and transit risk, then set the roll up for your packing bench with slit widths and perforated tear-off sheets.

Shop by grade:
Standard bubble wrap | Lite bubble wrap | Heavy duty bubble wrap | Double sided bubble wrap | Anti-static bubble wrap | Foil laminated bubble wrap | Kraft laminated bubble wrap | Foam laminated bubble wrap | Bubble bags

Bubble Wrap Grades at a Glance

Every commercial packing operation ships a different mix of goods, so one grade rarely covers everything. Use the table below to match each bubble wrap in our range to the products and freight conditions it is built for.

Grade What sets it apart Typical commercial use
Bubble Wrap Lite Lighter film that keeps parcel weight down High-volume, low-risk consignments and interleaving
Bubble Wrap Standard 10, 20 or 30mm bubble on 50 to 200m rolls, with slit and perforated options Everyday eCommerce, retail and warehouse dispatch
Bubble Wrap Heavy Duty Three-layer construction that resists bursting under load Machine parts, appliances and interstate freight
Bubble Wrap Double Sided Film on both faces of the bubble layer Items packed against each other in shared cartons
Anti-Static Bubble Wrap Limits static build-up during handling Circuit boards, components and assembled devices
Foil Laminated Bubble Wrap Reflective outer layer over the cushioning Freight exposed to heat or temperature swings
Kraft Laminated Bubble Wrap Paper face that sits against the product Furniture, finished timber and coated surfaces
Foam Laminated Bubble Wrap Soft foam layer that prevents scuffing Glass, polished metal and scratch-prone finishes
Bubble Bags Ready-made protective pouches Repeat SKUs, small parts and accessories

Roll Widths, Slitting and Perforation

Our core bubble wrap is manufactured on 1500mm rolls, which suit large items and wide packing tables. Where a bench handles smaller goods, the same roll is available slit into two 750mm, three 500mm or four 375mm rolls, so packers work with a width that fits the product rather than trimming excess film. Selected slit rolls are also perforated every 500mm, giving a clean tear-off sheet without a blade at the bench.

Roll lengths run from 50m through to 200m on the standard grade, which lets high-throughput sites change rolls less often while smaller dispatch areas keep a manageable roll on hand. If your operation needs a configuration outside the listed options, our team can talk through what is possible.

Matching Bubble Wrap to Your Industry

  • eCommerce and fulfilment: standard 10mm bubble on slit, perforated rolls keeps wrapping consistent across packers and shifts.
  • Removalists and furniture suppliers: kraft or foam laminated wrap protects finished surfaces, with heavy duty grades for cabinets, appliances and white goods.
  • Electronics and technical equipment: anti-static wrap and bags for components that cannot be exposed to static discharge.
  • Warehousing and 3PL: a mix of standard and heavy duty grades covers mixed-SKU orders without stocking a different material for every client.
  • Manufacturing and engineering: heavy duty 20mm or 30mm bubble for parts with sharp edges, weight or awkward shapes.
  • Temperature-sensitive freight: foil laminated wrap adds a reflective layer for goods travelling through hot loading docks and long linehaul routes.

Faster, More Consistent Packing Benches

Protective packaging affects every order that leaves your site, so small gains at the bench add up across a full day of dispatch. Perforated rolls remove the need to measure and cut each sheet. A bubble wrap dispenser keeps rolls off the floor and within reach. For products packed in the same size every time, bubble bags replace wrapping altogether. Pair your wrap with cardboard boxes and cartons and packing tape from the same order to keep the whole packing station supplied from one source.

Recycling and Lower-Plastic Options

Standard bubble wrap is made from low-density polyethylene, plastic resin code 4. Clean wrap can be collected through commercial soft plastic recycling services where your waste contractor offers them, and intact wrap from inbound deliveries can often be reused on outbound orders first. For void fill, our biodegradable Bio Void Fill gives businesses a way to cut conventional plastic from cartons without changing how the bench operates.

Why Businesses Source Bubble Wrap from Premium Packaging

We operate from our warehouse in Werrington, Western Sydney, and deliver to businesses in Sydney, Melbourne, Brisbane, Adelaide, Perth and regional Australia. Our team works with procurement officers, warehouse supervisors and dispatch managers every day, so recommendations come from how each grade performs on a real packing line. Whether you need a few rolls to trial a grade or recurring bulk supply for multiple sites, we set up ordering around your volumes. Browse our full protective packaging range or bubble mailers for lighter parcels.

Frequently Asked Questions

What bubble size is best for shipping fragile goods?

A 10mm bubble suits most light to medium fragile items and wraps closely around shapes. A 20mm bubble adds cushioning for heavier or more breakable goods, and 30mm gives the greatest separation for bulky items on long freight routes.

Can I order bubble wrap narrower than 1500mm?

Yes. Standard 1500mm rolls are available slit into 750mm, 500mm or 375mm widths, and selected slit rolls come perforated every 500mm. Speak with our team if you need a different setup for your bench.

Which bubble wrap should be used for electronic components?

Anti-static bubble wrap is designed for circuit boards, components and devices that can be damaged by static discharge. For smaller parts, anti-static bubble bags offer the same protection in a ready-made pouch.

Is bubble wrap recyclable in Australia?

Standard bubble wrap is made from LDPE, resin code 4, and can be recycled through commercial soft plastic recycling services where available. Reusing clean, intact wrap from inbound stock on outbound orders also reduces the volume your site disposes of.

Does Premium Packaging supply bubble wrap in bulk for warehouses and 3PLs?

Yes. We supply bubble wrap by the roll or in larger bulk quantities with repeat ordering for warehouses, 3PLs, removalists and eCommerce operations. Orders are delivered Australia-wide from our Werrington warehouse.

Talk to Our Team About Bubble Wrap Supply

Tell us what you ship, how far it travels and how many orders your bench handles, and we will recommend the grades, widths and roll setup that suit your operation.

Phone: 1300 923 215
Email: admin@premiumpackaging.com.au
Address: Unit 7/561 Great Western Highway, Werrington NSW 2747

Shopping Cart