Anti-Static Bubble Wrap for Wrapping Sensitive Electronics

Anti-static bubble wrap protects static-sensitive electronics from both physical damage and static discharge, on a roll that wraps to fit any shape. The bubble layer cushions the item against knocks in handling and transit, while the anti-static film safely dissipates static so a charge cannot build up and damage the part inside. It suits circuit boards, assemblies, drives and instruments, where a plain bubble wrap would cushion the part but leave it exposed to static. Premium Packaging supplies anti-static bubble wrap in bulk to electronics, IT and equipment operations across Australia, delivered from our Sydney base.

Specifications

• Protection: anti-static film that safely dissipates static.
• Bubble height: 10mm or 20mm (20mm for more cushioning on heavier or more fragile items).
• Roll: 1500mm wide by 100m long.
• Sizes: two options, shown in the table above.

What Anti-Static Bubble Wrap Is Used For

• Electronics manufacturing and assembly, wrapping boards, assemblies and populated units
• IT, repair and service, protecting drives, cards and equipment in transit and storage
• Component distribution, wrapping static-sensitive stock of mixed shapes and sizes
• Instruments and equipment, cushioning larger or irregular items that a bag will not fit

Why Anti-Static and Not Plain Bubble

The difference is the film. A standard bubble wrap cushions well, but the plastic can hold and pass on a static charge, which is a risk to any electronic component inside. Anti-static bubble wrap uses a dissipative film that lets static drain away safely rather than discharging into the part, so the item is protected from static as well as impact. For anything static-sensitive, the anti-static roll is the safe choice where a plain one is not.

Roll or Bags

The choice comes down to the shape of your parts. Anti-static bubble wrap on the roll wraps to fit odd shapes, larger items and mixed sizes, cutting to length as needed. For high volumes of uniform-sized parts, anti-static bubble bags are quicker to fill and seal. Where static protection is not needed, standard bubble wrap covers general cushioning. Many electronics operations keep the anti-static roll for irregular parts and bags for their common components.

Order Anti-Static Bubble Wrap for Your Business

Choose the bubble height that suits your parts and order the roll with the rest of your protective packaging and plastic packaging from one supplier with Australia-wide delivery. Anti-static bubble wrap is supplied by the roll, with bulk and recurring supply available. Our packaging specialists can help you match the wrap to your components.

Frequently Asked Questions

What is anti-static bubble wrap used for?

It protects static-sensitive electronics from both impact and static discharge while wrapping to fit any shape. It suits circuit boards, assemblies, drives and instruments in electronics manufacturing, IT, repair and component distribution.

What sizes does it come in?

It comes on a 1500mm by 100m roll, in a 10mm or a 20mm bubble height. The 20mm bubble gives more cushioning for heavier or more fragile items.

How is it different from plain bubble wrap?

Plain bubble wrap cushions against impact but can hold and pass on a static charge. Anti-static bubble wrap uses a dissipative film that lets static drain away safely, so it protects electronics from static as well as impact.

Should I use the roll or anti-static bubble bags?

The roll wraps to fit odd shapes, larger items and mixed sizes. Anti-static bubble bags suit high volumes of uniform-sized parts and are quicker to fill and seal. Many operations keep both.

Can I order anti-static bubble wrap in bulk?

Yes. It is supplied by the roll in bulk, with recurring supply available, delivered Australia-wide from our Sydney base.