P.E.T. Strapping Tool

PET Strapping Tool Kit for Getting Started

Setting up hand strapping usually means buying the strap, the dispenser, the tensioner, the sealer and the seals separately and making sure they all match. This PET strapping tool kit removes that guesswork. It brings the whole strapping station together in one purchase, matched and ready to use, so a business can start securing palletised and bundled loads straight away. Premium Packaging supplies it to manufacturing, warehousing and logistics operations across Australia, delivered from our Sydney base.

What Is in the Kit

• PET strap: 1 roll of 16mm x 0.9mm x 1200m polyester strap to get started.
• PET dispenser: holds the roll and feeds the strap cleanly at the bench.
• Tensioner: pulls the strap tight around the load.
• Sealer: crimps the seal onto the strap to lock the joint.
• Seals: a box of 1000 PET seals to secure the joints.

The kit covers 12mm to 19mm PET strap, so you can move to a different strap width later and still use the same tools.

How It Works

Hand strapping with the kit follows a simple sequence. The dispenser holds the roll so the strap feeds without tangling, the tensioner pulls the strap tight around the load, and the sealer crimps a seal onto the two strap ends to lock the joint under tension. The result is a secure, tight strap that holds a load together through handling and transport, applied at the bench without any powered equipment.

Who the Kit Suits

• Businesses new to strapping, setting up a hand strapping station for the first time
• Operations adding a station, equipping a second bench or a new dispatch area
• Manufacturing and warehousing, securing palletised and bundled loads for transport
• Sites that want everything matched, with strap, tools and seals confirmed compatible from the start

Reordering Consumables

Once the kit is set up, the tools stay and the consumables get replaced as they run out. Reorder PET strap and PET strap seals individually to keep the station running, and browse the wider strapping range for other widths and options. Setting the strap and seals up for recurring supply means the station never runs short.

Order the PET Strapping Tool Kit for Your Business

The kit gives you a complete, matched PET strapping station in one order, ready to secure loads from day one. If you are not sure whether the kit or individual components suit your operation, our packaging specialists can help you set up the right strapping solution and arrange ongoing supply of strap and seals.

Frequently Asked Questions

What is included in the PET strapping tool kit?

The kit includes a roll of 16mm x 0.9mm x 1200m PET strap, a PET dispenser, a tensioner, a sealer and a box of 1000 PET seals. It is a complete hand strapping station in one purchase.

What strap sizes does the kit work with?

The kit covers 12mm to 19mm PET strap and comes with a 16mm x 0.9mm x 1200m roll to start. You can move to a different strap width within that range and use the same tools.

Do I need anything else to start strapping?

No. The kit is complete and ready to use at the bench. As the strap and seals run out, reorder them individually to keep the station running.

How does the kit apply strap?

The dispenser feeds the strap, the tensioner pulls it tight around the load, and the sealer crimps a seal onto the strap ends to lock the joint under tension. It applies strap by hand with no powered equipment.

Can I reorder the strap and seals separately?

Yes. PET strap and PET strap seals are available individually, so you can keep the station supplied with consumables, with recurring supply available Australia-wide from our Sydney base.