Transfer Tape Reverse Wound

Transfer Tape Reverse Wound for Applicator Mounting and Bonding

Transfer tape reverse wound is the adhesive transfer tape wound for a reverse-feed applicator, built to run cleanly through a tape gun. It carries a strong adhesive on a thin tissue carrier, which adds strength and conformability so the tape holds firmly and follows curves and slightly uneven surfaces. It grips most papers and films on contact for an instant bond, and holds permanently, which makes it the choice for mounting name plates and badges as well as bonding artwork and brochures. Premium Packaging supplies transfer tape reverse wound in bulk to sign, print, display and assembly operations across Australia, delivered from our Sydney base.

Specifications

• Widths: 6mm, 9mm, 12mm and 18mm.
• Length: 25m rolls.
• Carrier: tissue carrier for strength and conformability.
• Adhesive: excellent adhesion to most papers and films, instant and permanent.
• Applicator: fits the HT20 tape gun.
• Temperature range: -10 to +120 degrees Celsius.

What Transfer Tape Reverse Wound Is Used For

• Name plate and badge mounting, permanent mounting where the bond has to hold for good
• Sign and display assembly, bonding panels, overlays and graphics
• Artwork and print, instant bonding of artwork, brochures and printed pieces
• Applicator work, running through an HT20 tape gun for a fast, neat adhesive line

Reverse Wound and the Tissue Carrier

Two things set this tape apart. First, it is reverse wound, so the adhesive faces the way a reverse-feed applicator needs it, which is why it fits the HT20 tape gun and loads without fuss. Second, it has a thin tissue carrier rather than adhesive alone, which gives the tape body, strength and a little give, so it conforms to curves and holds firmly on name plates, badges and panels. With a working range of -10 to +120 degrees Celsius, it holds up in cold and hot conditions alike.

Reverse Wound or Standard Transfer Tape

Choose the wind to match your applicator. Transfer tape reverse wound is wound for a reverse-feed gun such as the HT20 and comes in 6mm through 18mm for a range of mounting and bonding jobs. The standard transfer tape is wound for general use in a 12mm roll. If you run a tape gun, the wind has to match the tool, so pick the reverse-wound tape for an HT20 applicator and the width that suits the job. For a carrier-backed bond with more strength again, double sided polyester tape is the film-carrier alternative.

Running It Through an Applicator

A tape gun makes reverse-wound transfer tape fast to apply. A transfer tape dispenser lays the adhesive and takes up the liner in one pass, so an operator gets a clean strip of adhesive along a panel or plate in a single motion. Matching the reverse-wound tape to the applicator keeps it feeding cleanly on a busy mounting or sign bench.

Order Transfer Tape Reverse Wound for Your Business

Choose the widths and quantities that suit your work and order the tape with an applicator and the rest of your tapes and dispensers from one supplier with Australia-wide delivery. Transfer tape reverse wound is supplied by the roll in cartons, with bulk and recurring supply available so a mounting bench never runs short. Our packaging specialists can help you match the tape and applicator to your work.

Frequently Asked Questions

What is transfer tape reverse wound used for?

It is used for permanent mounting of name plates and badges, assembling signs and displays, and bonding artwork and brochures. It grips most papers and films on contact and holds permanently.

What sizes does it come in?

It comes in 6mm, 9mm, 12mm and 18mm widths, all on 25m rolls. The range covers fine mounting and badge work through to wider panel bonding.

What tape gun does it fit?

Transfer tape reverse wound fits the HT20 tape gun. It is wound for a reverse-feed applicator, so it loads and feeds cleanly, and it works across a range of -10 to +120 degrees Celsius.

What is the difference between reverse wound and standard transfer tape?

Reverse wound is wound for a reverse-feed applicator such as the HT20 and has a tissue carrier for strength and conformability, in a 6 to 18mm range. Standard transfer tape is wound for general use in a 12mm roll.

Can I order transfer tape reverse wound in bulk?

Yes. It is supplied by the roll in cartons in bulk, with recurring supply available for regular reorders, delivered Australia-wide from our Sydney base.